MEQ-115/SW

Order No.: 0244350

Graphic equalizer
  • 2-channel version, 2 x 15 frequency controls in 2/3 octave steps
  • Switchable control range ±6/±12 dB
  • Peak LED
  • Switchable low cut filter
  • Master volume control
  • Bypass switch and ground lift switch
  • Frequency controls with centre click
  • Inputs and outputs each via 2 x XLR and 2 x 6…

+ more
Buy at B2B shop
Productinfos
MEQ-115/SW
Graphic equalizer
  • 2-channel version, 2 x 15 frequency controls in 2/3 octave steps
  • Switchable control range ±6/±12 dB
  • Peak LED
  • Switchable low cut filter
  • Master volume control
  • Bypass switch and ground lift switch
  • Frequency controls with centre click
  • Inputs and outputs each via 2 x XLR and 2 x 6.3 mm jack
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Safety Notes and Warning Messages
The unit uses dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Inexpert handling may result in electric shock.
Do not operate the unit and disconnect the mains plug from the socket immediately if the unit or the mains cable is visibly damaged; if a defect might have occurred after the unit was dropped or suffered a similar accident, if malfunctions occur. In any case, the unit must be repaired by skilled personnel.
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.
Supplies Technical specifications

Technical specifications MEQ-115/SW

MEQ-115/SW
Description graphic equalizer
Frequency range 20-20,000 Hz
Control range switchable ±6/±12 dB
Control frequencies 2 x 25/40/63/100/160/250/400/630 Hz/ 

1/1.6/2.5/4/6.3/10/16 kHz

Input signal 0.775 V
Input impedance 50 kΩ
Output signal 0.775 V
Output impedance 600 Ω
Low cut 20 Hz/-3 dB
S/N ratio 66 dB
THD < 0.1%
Admiss. ambient temp. 0-40 °C
Power supply ˜ 230 V/50 Hz/10 VA
Dimensions 482 x 44.5 x 165 mm, 1 RU
Weight 2.5 kg
Inputs 2 x XLR, 2 x 6.3 mm jack
Outputs 2 x XLR, 2 x 6.3 mm jack
MEQ-115/SW
EAN code 4007754185218
Net weight 2.52 kg
Downloads
Product data sheet
Instruction manual
Catalogue page
Declaration of Conformity CE
Declaration of Conformity UKCA
Services
Contact & Information